Cisco Systems PA-4T Manual do Utilizador descarregar pdf (Página 50)

Installing a Port Adapter

PA-4T+ Synchronous Serial Port Adapter Installation and Configuration6-4

Figure 6-4 Aligning the Single-Width Port Adapter Between the Slot Guides

Step 7

With the port adapter halfway in the slot, connect all required cables to the port adapter.

Step 8 After connecting all required cables, carefully slide the port adapter all the way into the

slot until the port adapter is seated in the router.

Step 9 After seating the port adapter in the router, slide the locking tab to the locked position and

tighten the screws. (Figure 6-1 and Figure 6-2 show the locking tab in the locked

position.)

This completes the procedure for installing a new port adapter in a Cisco 7100 series router. Proceed

to Chapter 8, “Conﬁguring the PA-4T+ Interfaces,” to connect the necessary cables to your port

adapter.

22132

0 /

XMTRRCVR

RCLK

FERF

AIS OOF LL

Guides

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 75 76

Sem comentários

Cisco Systems PA-4T Manual do Utilizador Página 50