Cisco Systems XR 12000 Series Manual de Instalação descarregar pdf (Página 27)

Cisco XR 12000 Series Router Ethernet Line Card Installation

OL-7861-01

Removing and Installing SFP Modules

Removing a Bale Clasp SFP Module

To remove this type of SFP module, follow these steps:

Step 1 Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.

Step 2 Disconnect and remove all interface cables from the ports; note the current connections of the cables to

the ports on the line card.

Step 3 Open the bale clasp on the SFP module with your index finger in a downward direction, as shown in

Figure 18. If the bale clasp is obstructed and you cannot use your index finger to open it, use a small

flat-blade screwdriver or other long, narrow instrument to open the bale clasp.

Step 4 Grasp the SFP module between your thumb and index finger and carefully remove it from the port, as

shown in Figure 18.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 83 84

Sem comentários

Cisco Systems XR 12000 Series Manual de Instalação Página 27