Cisco Systems OL-11567-02 Manual do Utilizador Página 8
- Página / 32
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
8
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 3.2.171.6
OL-11567-02
Important Notes
Step 5 To specify the access level for this community, enter this command, where ro is read-only mode and rw
is read/write mode:
config snmp community accessmode {ro | rw} name
Step 6 To enable or disable this SNMP community, enter this command:
config snmp community mode {enable | disable} name
Step 7 To save your changes, enter save config.
Step 8 Repeat this procedure if you still need to change the default values for a “public” or “private” community
string.
Changing the Default Values for SNMP v3 Users
The controller uses a default value of “default” for the username, authentication password, and privacy
password for SNMP v3 users. Using these standard values presents a security risk. Therefore, Cisco
strongly advises that you change these values.
Using the GUI to Change the SNMP v3 User Default Values
Follow these steps to change the SNMP v3 user default values through the controller GUI.
Step 1 Click Management and then SNMP V3 Users under SNMP.
Step 2 If “default” appears in the User Name column, click Remove to delete this SNMP v3 user.
Step 3 Click New to add a new SNMP v3 user.
Step 4 When the SNMP V3 Users > New page appears, enter a unique name in the User Profile Name field. Do
not enter “default.”
Step 5 In the remaining fields, choose Read Only or Read Write to specify the access level for this user, choose
the authentication and privacy protocols to be used, and enter a password for each.
Step 6 Click Apply to commit your changes.
Step 7 Click Save Configuration to save your settings.
Using the CLI to Change the SNMP v3 User Default Values
Follow these steps to change the SNMP v3 user default values through the controller CLI.
Step 1 To see the current list of SNMP v3 users for this controller, enter this command:
show snmpv3user
Step 2 If “default” appears in the SNMP v3 User Name column, enter this command to delete this user:
config snmp v3user delete username
The username parameter is the SNMP v3 username (in this case, “default”).
- Release 3.2.171.6 1
- Controller Requirements 2
- Software Release Information 2
- Installation Notes 3
- Safety Information 4
- Installation Instructions 5
- Important Notes 6
- Heavily Loaded Controller CPU 10
- Client Channel Changes 11
- Maximum MAC Filter Entries 11
- RADIUS Servers 11
- OL-11567-02 12
- Important Notes 12
- Apple iBook 13
- Supported 13
- Caveats 17
- Open Caveats 19
- Troubleshooting 26
- Documentation Updates 26
- Related Documentation 26
- Obtaining Documentation 27
- Documentation Feedback 27
- Submitting a Service Request 30
Manuais e produtos relacionados com Redes Cisco Systems OL-11567-02
Redes Cisco Systems VIP-FE-TX/4E Guia do Utilizador
(58 páginas)
(58 páginas)
Redes Cisco Systems PI21AG Manual do Utilizador
(34 páginas)
(34 páginas)
Redes Cisco Systems Dial NMS Instruções de Operação
(132 páginas)
(132 páginas)
Redes Cisco Systems 535 Manual do Utilizador
(24 páginas)
(24 páginas)
Redes Cisco Systems BC-109 Manual do Utilizador
(56 páginas)
(56 páginas)
Redes Cisco Systems XR 12410 Manual de Instalação
(230 páginas)
(230 páginas)
Redes Cisco Systems Chassis AS5350 Manual de Instalação
(102 páginas)
(102 páginas)
Redes Cisco Systems ASA 5500 Manual do Utilizador
(16 páginas)
(16 páginas)
Redes Cisco Systems OL-1377-02 Manual do Utilizador
(14 páginas)
(14 páginas)
Redes Cisco Systems SS7 Manual do Utilizador
(64 páginas)
(64 páginas)
Redes Cisco Systems ASR 1000 Manual do Utilizador
(112 páginas)
(112 páginas)
Redes Cisco Systems OL-7821-04 Manual do Utilizador
(131 páginas)
(131 páginas)
ASROCK SBC-210 manuals
Owner’s manuals and user’s guides for Motherboards ASROCK SBC-210.
We providing 1 pdf manuals ASROCK SBC-210 for download free by document types: User Manual
Comentários a estes Manuais