Cisco Systems 15327 Manual do Utilizador descarregar pdf (Página 51)

100

101

CHAPTER

3-1

Ethernet Card Software Feature and Configuration Guide, R7.2

January 2009

Initial Configuration

This chapter describes the initial configuration of the ML-Series card and contains the following major

sections:

• Hardware Installation, page 3-1

• Cisco IOS on the ML-Series Card, page 3-2

• Startup Configuration File, page 3-7

• Multiple Microcode Images, page 3-11

• Changing the Working Microcode Image, page 3-12

• Cisco IOS Command Modes, page 3-13

• Using the Command Modes, page 3-15

Hardware Installation

This section lists hardware installation tasks, including booting up the ML-Series card. Because

ONS

15454 SONET/SDH card slots can be preprovisioned for an ML-Series line card, the following

physical operations can be performed before or after the provisioning of the slot has taken place.

1. Install the ML-Series card into the ONS 15454 SONET/SDH. See Chapter 2, “Install Cards and

Fiber-Optic Cable” of the Cisco ONS 15454 Procedure Guide or Cisco ONS 15454 SDH Procedure

Guide for information.

2. Connect the cables to the front ports of the ML-Series card.

3. (Optional) Connect the console terminal to the ML-Series card.

Note A NO-CONFIG condition is reported in CTC under the Alarms pane when an ML-Series card is inserted

and no valid Cisco IOS startup configuration file exists. Loading or creating this file clears the condition.

See the “Startup Configuration File” section on page 3-7 for information on loading or creating the file.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 583 584

Comentários a estes Manuais

Sem comentários

Cisco Systems 15327 Manual do Utilizador Página 51

Comentários a estes Manuais

Manuais e produtos relacionados com Software Cisco Systems 15327