Cisco Systems ONS 15310-CL Guia de Resolução de Problemas descarregar pdf (Página 129)

2-19

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

Chapter 2 Alarm Troubleshooting

2.7.3 AIS-P

This condition can also be raised in conjunction with the “TIM-S” alarm on page 2-139 if AIS-L is

enabled.

Clear the AIS-L Condition

Step 1 Complete the “Clear the AIS Condition” procedure on page 2-18.

Step 2 If the condition does not clear, log into the Technical Support Website at

http://www.cisco.com/techsupport for more information or call Cisco TAC (1-800-553-2447).

2.7.3 AIS-P

Default Severity: Not Reported (NR), Non-Service-Affecting (NSA)

Logical Objects: STSMON, STSTRM

The AIS Path condition means that this node is detecting AIS in the incoming path. This alarm is

secondary to another alarm occurring simultaneously in an upstream node.

Clear the AIS-P Condition

Step 1 Complete the “Clear the AIS Condition” procedure on page 2-18.

Step 2 If the condition does not clear, log into the Technical Support Website at

http://www.cisco.com/techsupport for more information or call Cisco TAC (1-800-553-2447).

2.7.4 AIS-V

Default Severity: Not Reported (NR), Non-Service-Affecting (NSA)

Logical Objects: VT-MON, VT-TERM

The AIS VT condition means that this node is detecting AIS in the incoming VT-level path.

See the “1.10.3 AIS-V on Unused 15310-CL-CTX Card VT Circuits” section on page 1-65 for more

information.

Clear the AIS-V Condition

Step 1 Complete the “Clear the AIS Condition” procedure on page 2-18.

Step 2 If the condition does not clear, log into the Technical Support Website at

http://www.cisco.com/techsupport for more information or call Cisco TAC (1-800-553-2447).

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 333 334

Sem comentários

Cisco Systems ONS 15310-CL Guia de Resolução de Problemas Página 129