Cisco Systems BC-23 Manual do Utilizador descarregar pdf (Página 54)

Configuring Transparent Bridging

Transparent and SRT Bridging Configuration Examples

BC-76

Cisco IOS Bridging and IBM Networking Configuration Guide

Configuration for Bridge 3

interface serial 0

encapsulation frame-relay

bridge-group 5

frame-relay map bridge 27 broadcast

frame-relay map bridge 134 broadcast

bridge 5 protocol ieee

Bridging in a Frame Relay Network with Multicasts

The multicast facility is used to learn about the other bridges on the network, eliminating the need for

the frame-relay map commands.

Following are the configuration commands for each of the bridges in a network that supports a multicast

facility:

Configuration for Bridge 1

interface ethernet 2

bridge-group 5

ip address 128.88.11.9 255.255.255.0

interface serial 0

encapsulation frame-relay

bridge-group 5

bridge 5 protocol ieee

Configuration for Bridge 2

interface serial 1

encapsulation frame-relay

bridge-group 5

bridge 5 protocol ieee

Configuration for Bridge 3

interface serial 0

encapsulation frame-relay

bridge-group 5

bridge 5 protocol ieee

Transparent Bridging over Multiprotocol LAPB Example

The following example illustrates a router configured for transparent bridging over multiprotocol LAPB

encapsulation:

no ip routing

interface ethernet 1

no ip address

no mop enabled

bridge-group 1

interface serial 0

no ip address

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60 61 62

Comentários a estes Manuais

Sem comentários

Cisco Systems BC-23 Manual do Utilizador Página 54

Comentários a estes Manuais

Manuais e produtos relacionados com Placas de rede Cisco Systems BC-23