Cisco Systems BC-23 Manual do Utilizador descarregar pdf (Página 62)

Configuring Transparent Bridging

Transparent and SRT Bridging Configuration Examples

BC-84

Cisco IOS Bridging and IBM Networking Configuration Guide

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet3/1, changed

state to up

%LINK-3-UPDOWN: Interface FastEthernet3/1, changed state to up

Router(config)# int ethernet 3/2

Router(config-if)# bridge-group 20

Router(config-if)# cut-through

Router(config-if)# no shutdown

Router(config-if)# exit

Router(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet3/2, changed state to up

%LINK-3-UPDOWN: Interface Ethernet3/2, changed state to up

Router(config)# int ethernet 3/3

Router(config-if)# bridge-group 20

Router(config-if)# cut-through

Router(config-if)# no shutdown

Router(config-if)# exit

Router(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet3/3, changed state to up

%LINK-3-UPDOWN: Interface Ethernet3/3, changed state to up

Configuration of IRB for PA-12E/2FE Port Adapter Example

The following example shows integrated routing and bridging enabled on the bridge groups. Bridge

group 10 is assigned an IP address and subnet mask and the shutdown state is changed to up. Bridge

group 10 is configured to route IP.

Router(config)# bridge irb

Router(config)# interface bvi 10

Router(config-if)# ip address 1.1.15.1 255.255.255.0

Router(config-if)# no shutdown

Router(config-if)# exit

Router(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface BVI10, changed state to up

Router(config)# bridge 10 route ip

Router(config)# exit

Router#

1 2 ... 57 58 59 60 61 62

Sem comentários

Cisco Systems BC-23 Manual do Utilizador Página 62