Cisco Systems 4/8xFE Guia do Utilizador descarregar pdf (Página 43)

Chapter 4 Installation and Maintenance

Installing the SCE 2000 Platform

Cisco SCE 2000 4/8xFE Installation and Configuration Guide

OL-7826-05 4-7

Attaching the Brackets to the SCE 2000

Before installing the SCE 2000 in the rack, you must first install an appropriate rack-mount

bracket on each side of the front of the SCE 2000, as illustrated in the following figure. See Tools

and Parts Required (on page 4-2) for a listing of the parts and tools required for installing the

rack–mount.

To install the rack-mount brackets on the SCE 2000 chassis, complete the following steps:

Step 1 Align the rack-mount bracket to the side of the SCE 2000. Choose the proper bracket for your

installation (2-post rack or 4-post rack) as illustrated in Rack-Mounting a SCE 2000 Platform (on

page 4-6).

Step 2 Insert and tighten three screws.

Figure

4-4: Attaching the Mounting Brackets (4-post)

Figure

4-5: Attaching the Mounting Brackets (2-post)

Step 3 Repeat steps 1 and 2 on the other side of the SCE 2000.

This completes the steps for attaching the rack-mount brackets to the SCE 2000.

If mounting the SCE 2000 in a rack with only two posts, skip to Mounting the System to a Rack

(on page 4-9).

If mounting the SCE 2000 in a rack with four posts, proceed to the next step to attach the crossrail

supports to the rack.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 130 131

Sem comentários

Cisco Systems 4/8xFE Guia do Utilizador Página 43