Cisco Systems 78-11180-01 Manual do Utilizador descarregar pdf (Página 18)

2-18

Installation Guide for the Cisco Secure PIX Firewall Version 5.2

78-11180-01

Chapter 2 Installing a PIX Firewall

Installing a PIX 520 or Earlier Model

Figure 2-18 lists the controls on earlier PIX Firewall models.

Figure 2-18 Earlier PIX Firewall Access

Step 2 Connect network cables to each of the PIX Firewall’s network interfaces. On the PIX 520, connect the

cables at the front of the unit; on earlier models, connect the cables at the rear.

If you are not installing a four-port Ethernet card, which is supported only with version 4.4(1) and later,

add the cables as shown in Figure 2-19.

Figure 2-19 Up to Four Single-Port Interfaces in a PIX Firewall

PIX Firewall version 2 supports two interfaces, version 3 supports three interfaces, versions 4.0 and 4.1

support three interfaces, version 4.2 supports four interfaces, version 4.3 supports four interfaces, and

version 4.4 supports six interfaces. Version 5.0, 5.1, and 5.2 support up to 6 interfaces.

H7484

Power

switch

Reset switch

Diskette

drive

Diskette eject button

Power

light

44305

Interface 1

Interface 3

Interface 2

Interface 0

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 37 38

Sem comentários

Cisco Systems 78-11180-01 Manual do Utilizador Página 18