Cisco Systems SS7 Manual do Utilizador descarregar pdf (Página 17)

CHAPTER

2-1

Cisco ICM Enterprise Edition SS7 Gateway Configuration Tool User Guide Release 6.0(0)

Using SS7Cfg to Configure Your

Gateway

Overview

For the purposes of this exercise, the following sample network configuration will

be used to set up an SS7 Generic (ITU) gateway using SS7Cfg.

Note The example exercise configures the network interface from the bottom up, which

is consistent with the way SS7Cfg was defined. (Notice that only Gateway 1 will

be configured in this example.)

In Figure 2-1, Gateway 1 has four links connecting to two different Signal

Transfer Points (STPs). Each STP is connected by two links combined into a

linkset. Gateway 1 has a point code of 150 and is connected to two STPs with

point codes of 10 and 11. Behind the STPs are two Service Switching Points

(SSPs) at point codes 200 and 201.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 63 64

Sem comentários

Cisco Systems SS7 Manual do Utilizador Página 17