Cisco Systems IOS XR Manual do Utilizador descarregar pdf (Página 255)

Implementing Routing Policy on Cisco IOS XR Software

How to Implement Routing Policy

RC-239

Cisco IOS XR Routing Configuration Guide

DETAILED STEPS

Command or Action Purpose

Step 1

configure

Example:

RP/0/RP0/CPU0:router# configure

Enters global configuration mode.

Step 2

router /jointfilesconvert/86220/bgp

as-number

Example:

RP/0/RP0/CPU0:router(config)# router /jointfilesconvert/86220/bgp 125

Configures a BGP routing process and enters router

configuration mode.

• The as-number argument identifies the

autonomous system in which the router resides.

Valid values are from 0 to 65535. Private

autonomous system numbers that can be used in

internal networks range from 64512 to 65535.

Step 3

neighbor

ip-address

Example:

RP/0/RP0/CPU0:router(config-/jointfilesconvert/86220/bgp)# neighbor

10.0.0.20

Specifies a neighbor IP address.

Step 4

address-family {ipv4 | ipv6} {multicast | unicast}

Example:

RP/0/RP0/CPU0:router(config-/jointfilesconvert/86220/bgp-nbr)#

address-family ipv4 unicast

Specifies the address family, the version of IP that is

in use, and either multicast or unicast.

• Enters address family configuration mode.

1 2 ... 250 251 252 253 254 255 256 257 258 259 260 ... 281 282

Sem comentários

Cisco Systems IOS XR Manual do Utilizador Página 255