Cisco Systems MDS 9020 Manual do Utilizador Página 4

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 22
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 3
Send documentation comments to mdsfeedbac[email protected]
3-4
Cisco MDS 9020 Fabric Switch Configuration Guide and Command Reference
OL-6988-02
Chapter 3 Initial Configuration
Initial Setup Routine
Setup Options
The setup scenario differs based on the subnet to which you are adding the new switch. You must
configure a Cisco MDS 9020 Fabric Switch with an IP address to enable management connections from
outside of the switch. Figure 3-1 shows a switch that is managed out-of-band over a connection to the
network through an Ethernet port.
Figure 3-1 Management Access to Switches
CLI
GUI
DNS server
IP
network
Router
IP address
172.16.1.1
Telnet or
SSH
SNMP
Management LAN
(Ethernet connection)
Switch 2
mgmt 0
(IP address:
172.16.1.2)
Console
connection
Out of band
management
subnetwork
79936
Vista de página 3
1 2 3 4 5 6 7 8 9 ... 21 22

Comentários a estes Manuais

Sem comentários