Cisco Systems Network Cabling Manual do Utilizador

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 16Control Node and Network Switch Cabling ExampleThis document provides back

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 252. Enter the privileged mode, as follows:3. Enter the configuration mode,

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 267. Set the host name of the switch stack, as follows:8. Set the switch sta

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 2711. Aggregate the two physical links between the two Cisco switches in the

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 2813. Set the remaining interfaces, which are identical, as follows. %Warni

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 29%Portfast will be configured in 23 interfaces due to the range command but

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 3017. Turn all the interfaces back on, as follows:18. Turn logging to the co

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 31interface Port-channel1no ip address!interface GigabitEthernet1/0/1no ip a

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 32!interface GigabitEthernet2/0/3switchport mode accessno ip addressno mdix

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 3321. Save the configuration across a reboot of the switch, as follows: Dest

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 17application nodes. Note that detailed instructions for adding application

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 18Table 1 shows how each port is used on the switch and control node. Table

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 19Racking and cabling guidelinesTo cable your control nodes to the network s

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 203. Connect the control nodes to the shared storage hardware, as follows:4.

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 21Configuring the switchesAfter you have racked and cabled the control nodes

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 224. Plug in the Cisco switches in a stack.5. Many boot-up and self-test mes

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 233. If the switch was used previously in a switch stack, and is now in a di

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 24 Changing Switch Number 3 to Switch Number 2 New Switch Number will be eff