Cisco Systems OL-25712-04 Manual do Utilizador descarregar pdf (Página 630)

100

101

Removing a Non-Existent Blade Server from the Configuration Database

Perform the following procedure if you physically removed the server hardware without first decommissioning

the server. You cannot perform this procedure if the server is physically present.

If you want to physically remove a server, see Removing a Server from a Chassis, on page 591.

Procedure

Step 1

In the Navigation pane, click the Equipment tab.

Step 2

On the Equipment tab, expand Equipment > Chassis > Chassis Number > Servers.

Step 3

Choose the server that you want to remove from the configuration database.

Step 4

In the Work pane, click the General tab.

Step 5

In the Actions area, click Server Maintenance.

Step 6

In the Maintenance dialog box, do the following:

a) Click Remove.

b) Click OK.

Cisco UCS Manager removes all data about the server from its configuration database. The server slot is now

available for you to insert new server hardware.

Turning the Locator LED for a Blade Server On and Off

Procedure

Step 1

In the Navigation pane, click the Equipment tab.

Step 2

On the Equipment tab, expand Equipment > Chassis > Chassis Number > Servers.

Step 3

Choose the server for which you want to turn the locator LED on or off.

Step 4

In the Work pane, click the General tab.

Step 5

In the Actions area, click one of the following:

• Turn on Locator LED

• Turn off Locator LED

Resetting the CMOS for a Blade Server

On rare occasions, troubleshooting a server may require you to reset the CMOS. This procedure is not part

of the normal maintenance of a server.

Cisco UCS Manager GUI Configuration Guide, Release 2.0

594 OL-25712-04

Removing a Non-Existent Blade Server from the Configuration Database

1 2 ... 625 626 627 628 629 630 631 632 633 634 635 ... 767 768

Comentários a estes Manuais

Sem comentários

Cisco Systems OL-25712-04 Manual do Utilizador Página 630

Comentários a estes Manuais