Cisco Systems IEM30004PC Manual de Instalação descarregar pdf (Página 121)

B-31

Cisco IE 3000 Switch Hardware Installation Guide

OL-13017-01

Appendix B Installation In a Hazardous Environment

Installing the Switch

Figure B-22 Mounting the Switch on a DIN Rail in a Parallel Position

After the switch is mounted on the DIN rail, connect the power and alarm wires, as described in the

“Connecting Power and Alarm Circuits” section on page B-36.

Note For instructions on how to remove the switch from a DIN rail, see the “Removing the Switch from a DIN

Rail or a Rack” section on page B-35.

Installing the Switch on a Wall

To attach the switch to a wall or a panel, follow these steps.

Warning

Read the wall-mounting instructions carefully before beginning installation. Failure to use the

correct hardware or to follow the correct procedures could result in a hazardous situation to people

and damage to the system.

Statement 378

1 15-mm DIN rail 3 7.5-mm DIN rail

2 Foot in extended position 4 Foot in recessed position

1 3

2 4

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 169 170

Sem comentários

Cisco Systems IEM30004PC Manual de Instalação Página 121