Cisco Systems IEM30004PC Manual de Instalação Página 70
- Página / 170
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
2-44
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Chapter 2 Switch Installation
Connecting the Switch to the Power Converter
Figure 2-37 Connecting to a Fiber-Optic SFP Module Port
Step 3 Insert the other cable end into a fiber-optic receptacle on a target device.
Step 4 Observe the port status LED.
The LED turns green when the switch and the target device have an established link.
The LED turns amber while the STP discovers the network topology and searches for loops. This process
takes about 30 seconds, and then the port LED turns green.
If an LED is off, the target device might not be turned on, there might be a cable problem, or there might
be a problem with the adapter installed in the target device. See
Chapter 3, “Troubleshooting,” for
solutions to cabling problems.
Step 5 If necessary, reconfigure and restart the switch or target device.
Connecting the Switch to the Power Converter
The Cisco IE 3000 switch can be used with an optional AC/DC power converter (PWR-IE3000-AC).
These sections describe the steps required to connect the switch to a power converter:
• Attaching the Power Converter to the Switch, page 2-45
• Installing the Power Converter on a DIN Rail, Wall, or Rack Adapter, page 2-46
• Connecting the DC Power Clip, page 2-46
• Connecting the Power Converter to an AC Power Source, page 2-47
• Connecting the Power Converter to a DC Power Source, page 2-51
• Applying Power to the Power Converter, page 2-53
1 LC connector
1
202031
- Installation Guide 1
- CONTENTS 3
- Contents 4
- 3 Troubleshooting 3-1 5
- Audience 9
- Conventions 9
- Related Publications 10
- Guidelines 10
- Overview 11
- Switch Models 12
- Front-Panel Description 12
- Chapter 1 Overview 13
- 10/100 Ports 15
- Dual-Purpose Ports 15
- 100BASE-FX Ports 15
- Power and Relay Connector 15
- Setup LED 18
- System LED 19
- Alarm LED 19
- Power Status LED 19
- 10/100 Port Status LEDs 20
- 100Base-FX Port Status LEDs 20
- Compact Flash Memory Card 21
- Rear-Panel Description 22
- Power Converter (Optional) 23
- Management Options 24
- Network Configurations 25
- Switch Installation 27
- Warnings 28
- Installation Guidelines 29
- Preparing for Installation 30
- Statement 1064 40
- Troubleshooting 81
- Verify Switch LEDs 82
- Verify Switch Connections 82
- Link Status 83
- Transceiver Issues 83
- Port and Interface Settings 83
- Ping End Device 83
- Verify Switch Performance 84
- How to Recover Passwords 85
- SN: XXXNNNNXXXX 86
- Technical Specifications 87
- • Range: 18 to 60 VDC 88
- • Nominal: 24 or 48 VDC 88
- • 1 A @ 48 VDC 88
- • 2 A @ 24 VDC 88
- Statement 1082 94
- Other Guidelines 96
- Verifying Package Contents 97
- OL-13017-01 100
- Adding Modules to the Switch 100
- Connecting Modules 101
- Statement 379 103
- Verifying Switch Operation 104
- Grounding the Switch 107
- Wiring the DC Power Source 109
- Statement 1003 110
- Statement 1030 110
- Statement 122 111
- Running POST 115
- Installing the Switch 116
- Statement 378 121
- Statement 1006 124
- Statment 381 127
- Wiring the External Alarms 128
- Connector 130
- Connecting Destination Ports 131
- Connecting to SFP Modules 135
- Class 1 laser product 136
- Statement 1008 136
- Statement 1081 139
- Connecting the DC Power Clip 142
- Preparing the AC Power Cord 143
- Color Meaning 144
- Statement 1067 147
- Where to Go Next 149
- Cable and Connectors 151
- Connector Specifications 152
- SFP Module Ports 153
- Console Port 154
- Pin 1 on one connector and 157
- Adapter Pinouts 158
- Signal DB-25 Pin Signal 159
- APPENDIX 161
- IP Settings 162
- Completing the Setup Program 162
- 10.4.120.106 163
- 255.0.0.0 163
- Step 10 These choices appear: 164
- Numerics 165
Manuais e produtos relacionados com Comutadores de rede Cisco Systems IEM30004PC
(24 páginas)ASROCK SBC-210 manuals
Owner’s manuals and user’s guides for Motherboards ASROCK SBC-210.
We providing 1 pdf manuals ASROCK SBC-210 for download free by document types: User Manual
Comentários a estes Manuais