Cisco Systems PA-4T Manual do Utilizador Página 41

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 76
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 40
CHAPTER
Cisco uBR7200 Series and the PA-4T+ Port Adapter 5-1
5
Cisco uBR7200 Series and the
PA-4T+ Port Adapter
This chapter provides information on the PA-4T+ port adapter and its use on Cisco uBR7200 series
universal broadband routers. This chapter includes the following sections:
Installation Overview, page 5-1
Removing a Port Adapter, page 5-2
Installing a Port Adapter, page 5-4
Installation Overview
The PA-4T+ can be installed in any of the available port adapter slots in the Cisco uBR7200 series.
Figure 5-1 shows a PA-4T+ installed in port adapter slot 2 of the Cisco uBR7246.
Figure 5-1 PA-4T+ in Port Adapter Slot 2—Cisco uBR7246
Depending on the circumstances, you might need to install a new port adapter or replace a failed port
adapter in the Cisco uBR7200 series. In either case, no tools are necessary; all port adapters available
for the Cisco uBR7200 series connect directly to the router midplane and are locked into position by
a port adapter lever (Cisco uBR7223) or retention clip (Cisco uBR7246). When removing and
replacing a port adapter, you will need an antistatic mat onto which you can place a removed port
adapter and an antistatic container into which you can place a failed port adapter for shipment back
to the factory.
14615
PA-4T+ port adapter
Vista de página 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 75 76

Comentários a estes Manuais

Sem comentários