
3-2
Administrator Guide for Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
OL-6571-02
Chapter 3 Configuring Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
Information About Configuring Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
Note If you are using an IP PBX that runs standard H.323 or SIP call control, see the “How to Configure
Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1” section on page 3-3 for the
required system settings and see your IP PBX documentation for information about how to configure
those settings.
Table 3-1 describes the Release 5.2.1 Management Console fields and lists the default settings.
Table 3-1 Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1 Management
Console Fields and Default Settings
Setting Description Default
General Settings
Max Number of
Callers
Maximum number of callers Release 5.2.1 will accept. This
maximum number can be a combination of H.323 and SIP
callers.
960
Outdial Protocol Controls whether outdials from the IP-gateway server are
placed by using H.323 or SIP.
Note In mixed H.323-SIP, call-control environments, you
must select one protocol for outdials; otherwise, the
default protocol will be used.
H.323
Verbose Logging Sets the level of logging information. Normal
H.323 Settings
Enabled Enables or disables the H.323 protocol. Yes
Max Number of
Callers
Maximum number of H.323 callers Release 5.2.1 accepts. 960
E.164 Address A dialable number for the IP-gateway server. —
H323 ID Caller ID name that is used by Release 5.2.1. MeetingPlace
Gateway Address and
Gateway Port
IP address and port number of the server responsible for
routing H.323 calls. Outdials using H.323 are directed to this
IP address and port if an H.323 gatekeeper is not used.
Note You must enter this gateway information if you are
using H.323 without a gatekeeper.
Address: —
Port: 1720
Use Gatekeeper Enables the IP-gateway server to register with an H.323
gatekeeper.
No
Gatekeeper Address
and Gatekeeper Port
IP address and port number of the H.323 gatekeeper. If an
H.323 gatekeeper is used, Release 5.2.1 registers with the
server and directs H.323 outdials to the server.
Note If using an H.323 gatekeeper, ensure that your system
allows traffic to pass through ports 1024-65535
because MeetingPlace H.323/SIP IPGW uses these
ports for dynamic TCP and UDP traffic.
Address: —
Port: 1719
Comentários a estes Manuais