Cisco Systems XR 12410 Manual de Instalação descarregar pdf (Página 206)

Chapter 5 Maintaining the Router

Removing and Installing a Chassis

5-42

Cisco XR 12410 Router Installation Guide

OL-13832-01

Step 2 Remove the card (a CSC in this example):

a. Pivot the ejector levers to unseat the card from the backplane connector.

b. Grasp the card by its metal card carrier and slide the card out of the

slot

(Figure 5-25).

–

Place the card directly into an antistatic bag or other ESD-preventive

container.

Figure 5-25 Removing a Card from the Switch Fabric and Alarm Card Cage

Step 3 To install the card, reverse the procedure in Step 2.

Step 4 Close the air filter door and tighten the captive screws.

Removing and Installing a Chassis

This section provides the procedures to remove and replace a chassis. You may

need to perform this procedure to replace a defective chassis or move it to another

location. These instructions include the steps directing you to removal and

replacement instructions for individual components such as power supplies and

line cards.

ALARM

53270

Air filter door

-3/STM-POS

6DS3–SMB P

12DS3–SMB P

-48/STM-16-SCPOS

OC-12/STM-4 ATM

ST ETERNET

E PROCESSOR

Clock scheduler card

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 229 230

Sem comentários

Cisco Systems XR 12410 Manual de Instalação Página 206