Cisco Systems MGX 8850 Guia do Utilizador descarregar pdf (Página 90)

100

101

2-32

Cisco MGX 8850 Routing Switch Command Reference

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

Chapter 2 Shelf Management Commands

cnfsnmp

Configure SNMP Strings

Configure the SNMP strings. The three strings are community, contact, and system location. You can

configure only one of these strings with a single execution of cnfsnmp.

Cards on Which This Command Executes

PXM45

Syntax

cnfsnmp

-community [string <ro | rw>]

-contact [string]

-location [string]

Syntax Description

Attributes

Related Commands

dspsnmp

-community Keyword that establishes the community access string to permit access to SNMPv1

protocol.

The string acts like a password and permits access to the SNMP Protocol. Further, the

access of either read-only or read-write allows operations on MIB Objects according

to the setting. The setting can be either “ro” for read-only or “rw” for read-write. The

default is read-only With read-only, authorized management stations are only able to

retrieve MIB objects.

With read-write access, authorized management stations are able to retrieve and

modify MIB objects.

-contact Keyword that specifies the system contact string for sysContact MIB object in

MIB-II. The string in this case is text that describes the contact. For example, the

contact could be an administrator’s email address. The default is no text.

-location Keyword that specifies the location of the system. The default is no text. The system

location string is used for sysLocation MIB object in MIB-II.

Log: log State: active Privilege: SUPER_GP

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 785 786

Comentários a estes Manuais

Sem comentários

Cisco Systems MGX 8850 Guia do Utilizador Página 90

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Cisco Systems MGX 8850